Why do my products that contain liquid have to be tested dry?

In order to be able to see the flow of liquid in the chamber it is best to test products containing liquid dry in our chambers. Products containing liquids often need to be tested "upside down" to ensure that any air remaining in the container does not escape first... The entire part of the [...]

Why do my products that contain liquid have to be tested dry?2022-09-23T16:28:48+00:00

Can rigid products (e.g. glass) be tested in DVACI chambers?

Yes, there is no problem to test the rigid containers, the stresses will be even higher in the sealing part. The difference in pressure between the inside and outside of the container will allow the test to be carried out with very good results.

Can rigid products (e.g. glass) be tested in DVACI chambers?2022-09-23T16:27:26+00:00

What are the differences between the AUTO and PLC control versions?

In fact, these two versions are very similar and the differences are not obvious. The PLC version, which is the highest range, has a complete "ORION OS" operating system that allows you to install applications to control the products in different ways, such as on a smartphone. This version also includes a multi-user system [...]

What are the differences between the AUTO and PLC control versions?2022-09-23T16:26:21+00:00

What is the opening/closing mechanism of the CDV vacuum chambers?

All our units are supplied with a cover system guided by 2 hydraulic cylinders to facilitate opening and closing. These cylinders act as shock absorbers. This system prevents possible injuries that could result from handling a conventional bonnet without these "shock absorbers".

What is the opening/closing mechanism of the CDV vacuum chambers?2022-09-23T16:25:05+00:00

How do you check the tightness of a small bag?

Usually, there is little air in the bag, so this can cause 2 problems: 1-1 When we make the immersion test in an ASTM D3078 vacuum chamber, we may not be able to create enough pressure differences across the container walls to observe leaks. This will depend on the size of the bag and [...]

How do you check the tightness of a small bag?2022-09-23T16:16:46+00:00